Long Beard and Moustache Cosplay Accessories
How to use these beards;
1. Clean your face after shaving.
2. Cut off the unnecessary mesh of the beard, or trim the shape according to your own preference
(suitable for most people's face shape, generally without trimming).
Please be sure to confirm whether the beard is suitable for you, because once the beard is trimmed, it will face the risk of no return!
3. This simulation beard is made of real hair knot technology, so it should not be too short and too close to the knot part when trimming, otherwise it will cause the hair can not be fixed on the yarn net, causing the hair to fall off.
4. Trim the beard and position it on the face.
5. Apply a proper amount of glue on the mesh surface of the moustache yarn, which is easy to open and turn white when there is too much glue; or directly pat on the skin with your finger, just a small amount, wait for 3-5 minutes, and the glue has a drawstring shape.
6. Paste the middle part first, then the two sides, and pay attention to the height of both sides.
7. Use slightly wet gauze or silk stockings to pad the fingers and press for about 1 minute to make the glue close to the skin and not easy to open, and it is Matt, not white, with higher simulation.
8. If there is too much glue or the glue turns white, use a cotton swab to dip in the glue cleaning solution or 95% medical alcohol to wipe the glue away.
9. After the beard is stuck firmly, comb the beard in order, trim off the disordered hair, or use micro gel water for simple shaping.
10. This baby uses imported gauze mesh, which is better in air permeability and invisibility.
However, due to the different skin colour of each person, after the beard is pasted, the bottom mesh may be faintly visible. At this time, you need to use powder puff on the edge of the yarn mesh, especially on the upper part of the bottom powder which is similar to the skin colour. After the modification and transition of the bottom powder, the yarn mesh edge will naturally transition to the skin colour, and the effect will be very realistic. When a general performance is used, a professional makeup artist can achieve a false and real effect. When wearing an amateur beard, it is especially necessary to use the foundation transition to cover the transition effect between the edge of the gauze and the skin.
How to remove the beard:
1.Use cotton ball dipped in some glue cleaning solution or 95% medical alcohol to wet the glue on the moustache gauze net, then pull the gauze net and gently tear it off. Do not directly tear the beard hair!
If the adhesion is too tight, use a cotton swab to stick on the glue cleaning solution or 95% medical alcohol to smear the area, and tear the area slightly while applying.
2. For a large area of beard, such as a beard, you can spray glue detergent directly, and then press the beard, and take it off directly after the glue on the gauze net melts. Please be careful not to spray it into your eyes or nose.
3. If the beard is on the edge, there may be a small amount of hair falling off, so you need to apply more glue or alcohol.
Beard care:
1.To remove the glue on the moustache gauze, dip the cotton ball in the glue cleaning solution or 95% medical alcohol, press the gauze gently to make the glue wet and open, and then use the clean cotton cloth to absorb the glue residue.
Never rub the moustache! 2. After a long time of use, there is too much glue on the beard hair. If it needs to be cleaned, put a proper amount of water, mix some glue cleaning liquid or alcohol to soak for 15 minutes, then use the water to clean and dry naturally.
3. After the beard is repeatedly used, the original shape of the beard will be changed due to time problems and makeup removal reasons. If you encounter such a problem, you can find a small model with radian to paste the beard on it with double-sided adhesive tape, blow it with a hair dryer (it is recommended to use a small horsepower, a high temperature, 1800W) after sticking it firmly, and at the same time, use a fine tooth comb to blow out the original shape according to the texture comb, or use a small amount of curry water to set the shape
Usage of glue unloading solution:
When removing the beard, use a cotton swab dipped with a little glue cleaner to apply it between the skin and the gauze, which can effectively help to remove the gauze.
After removing the beard, evenly apply the glue cleaner on the surface of the skin with glue, wait for 1-2 minutes,and then use water, which can effectively clean the glue residue without damaging the skin.
After the beard has been used for many times, too much glue may be stuck on the yarn web.
You can use a cotton swab to smear the glue on the yarn web, remove the glue, wash it with water, and air dry it with a blower at a low temperature.
If you use it for the first time, please try it on a small piece of skin first to avoid allergic symptoms caused by the over sensitive skin. If you feel skin discomfort during the trial, please stop using it immediately.
t the Woodland Gatherer we find & create all things boho and whimsical, for the wild & free vibes we love the most.
We aim to stock the kind of things that inspire imaginative play, in all ages, because we believe that the imagination is the stepping stone to creative thinking - a highly undervalued, yet incredibly useful, thing in all areas of life.
~
This treasure should take between 12-24 days to arrive, but on the rare occasion some items get held up in transit. If you have any concerns whatsoever, please, let Miss Snotface Lahdedah know, so she can do everything she can to make things right, before leaving negative reviews.
~
Woodland Gatherer | Australian Online Gift Store | Gifts & Treasures | Special Occasions & Everyday Fun | Whimsical Treats | Costumes | Jewellery | Fashion | Crafting DIY | Stationery | Boho Festival Fashion | Home Decor & Fittings
Afterpay Available
Paypal Available
Worldwide Shipping Available
Small Town Customer Service